JP EZ Trigger (roller bow)

Product Description

Armageddon Gear Revolution "roller" trigger bow
Speed hammer to reduce lock time
Adjustable trigger pull weight, 3lbs-4.5lbs
For .154 small pin receivers
Includes anti rotation trigger pins

The new JP EZ Trigger™ is an adjustable 3.0-4.5 lb competition, law enforcement or CMP compliant trigger. This trigger represents the best performance value and strikes the best compromise between safety, performance, value and mission-specific versatility. Once you try it, we think you will agree.

JP combined the versatility of their component parts with the convenience of a module in the new JP EZ Trigger™. In the past, JP has designed and marketed a high-tech single-stage module as part of our ongoing pursuit of improvements to the AR-15 platform. However, JP soon felt that they could offer better value for the dollar and improved overall performance and versatility with a complete evolution of the proven JP Fire Control System. This innovative new trigger can be installed in about fifteen minutes without any gunsmith fitting or modification of parts. It really is the best of all worlds—a superb trigger job on par with JP's own professional in-house installation, the speed and ease of a module and the versatility of a components trigger.

The Armageddon Gear Revolution Roller Trigger bow helps the shooter get a consistent trigger pull, no matter where on the bow your finger lands. When a straight back trigger pull is accomplished, the Roller bow feels similar to a standard trigger. However, if the finger placement isn't ideal, the Roller bow will help achieve a similar type of pull and helps you realize if you have bad finger placement.

Spring Selection Guide:

Competition/Recreation
The yellow/yellow combination may be used for competition and various recreational applications with hand loads or domestic-manufactured, non-military ammunition. It will result in a release weight in the 3.0-3.5 lb. range on most receivers.
Enhanced Ignition Reliability
The yellow trigger spring combined with the red hammer spring will yield a release weight of 3.5-4.0 lbs. on most receivers and offers increased reliability for (5.56 NATO) or foreign-manufactured ammo with low sensitivity primers. The yellow-red springs must be used for any large-frame AR installation to ensure 100% ignition reliability. This is also the minimum acceptable combination for tactical duty (LE) installations and should be used only with domestic-manufactured ammo in this application.
Duty/Defense
The tactical spring set includes a full powers (gray) hammer spring (purchased separately) and yellow trigger spring. It may be required for agencies that mandate a trigger release weight of over 4 lbs. This set up also insures 100% ignition reliability on both AR-15 and AR-10 type rifles.
CMP
To meet NRA Service Rifle Competition rules of a 4.5 lb. release weight, the CMP spring set (purchased separately) includes the full-power hammer spring and a custom trigger return spring, which will allow you to tune to a release weight just over 4.5 pounds to lift the NRA weights.

AR-15 .154" Small pin trigger kit, complete with trigger, speed hammer, disconnector, over-sized anti-walk pins, adjustable/reversible and spring sets for .223 competition or duty applications and .308 (AR-10) applications.