- 16.5" barrel with 14.5" M-Lok hand guard
- NP3 receivers and bolt carrier group
- Gen 4 ambi design
- Flared magwell
- Ambi Recessed Finger Rest
- Ambi Magazine Release
- Ambi bolt catch/release
- Ambi safety
- QD sling mount
- Receiver tension screw in lower
- Integrated over-sized trigger guard
- POF E2 extraction
- Short stroke piston operation
- 5 position adjustable piston block
- Nitride, heat treated, fluted barrel
- Drop in POF trigger
- Weight: 7.3 lbs.
- Length (collapsed): 34"
- Twist rate: 1:10
POF's Gen 4 Revolution rifle is the same weight as many AR-15's. The receivers are NP3 coating, this both looking very cool as well as serving another very specific purpose. NP3 is a surface treatment for aluminium and steel in this case, that combines sub-micron particles of PTFE (Polytetraflouro-ethylene) with autocatalytically applied nickel/phosphorus. This makes for an extremely slick and hard surface. The lower of this rifle is completely outfitted with ambidextrous controls. This includes the bolt catch/release, safety, and magazine release. If there is any issue with your receivers not fitting as tightly as you would like you can tighten the tensioning screw in the lower receiver. To save weight the top rail only allows for picatinny rail attachments at the very front at 12 o'clock. However, you may attach M-lok accessories at the 3, 6, and 9 o'clock positions. The barrel is nitride treated. Nitride has been shown to lend itself very well to barrel longevity and great accuracy, as it only adds a minuscule layer to the surface that is being treated.
For more info, visit POF