- Extremely strong pins
- Built to withstand the high impact 9mm carbines, and suppressed weapons.
- Will not rotate
- Enlarged for tighter lower receiver fit
- Weight: 0.2 oz.
These are the Generation 2 Mod 2 pin sets. They are the STRONGEST pins that can be produced and were designed to withstand the high impact of full and semi-automatic 9mm and .223 suppressed weapons.
The pins are stainless steel. End retainers are black or flat dark earth. An absolute must-have for all M-16s to prevent wear on your irreplaceable M-16 or SBR AR-15 receivers. Pin installation guide tool & 2 allen wrenches included. No modification to your firearm is required.
The .1555 dia. pin is for worn receiver trigger and hammer pin holes. Being non-rotational, further wear is eliminated. They will also fit new receivers and will remove the free-play in match triggers. The .1555 will not fit Jewell Trigger System.
The .170 size fits late model Colts.
For Rock River National Match triggers use the .1555 only.
The only difference from the Gen 2 pin kit is the appearance of the sideplates. There is no strength difference.
PLEASE READ INSTRUCTIONS!!! Over-torquing the screws can casue damge to these sideplates
For more information please visit, kns precision inc.